Tag Archives: design


Bambi-Table_Caroline-Olsson_01Look under the table or chair and you will probably see four tidy straight legs, but increasingly designers have been playing with this convention. You can change the height of your table, use other materials for legs or if you can’t decide if you want to go contemporary or traditional have both! Here are a few of the great legs I’ve seen trotting around some of the shows this year.

Jaime Hayon’s Multileg Table for BD Barcelona Four different wonderfully weighty wood turned legs made of Alderwood.Jaime_Hayon_Multileg-Table

Boca Do Lobo’s Royal Dining Table transforms from  traditional  chippendale legs at one end then blasted into a vectorised future at the other. The vector pattern continues across the table top mixing old and new pattern with very high traditional quality.Boca-do-Lobo-royal_01

As you can imagine there were plenty of fabulous legs at Milan this year.

Floris Schoonderbeek’s Axechair Chair uses a traditional axe handle from Swedish axe maker Gränsfors as its legs.  Set into a cast iron chair base it  maintains the connection with the axe.Floris_Schoonderbeek_Axe_Chair

Thomas Schnur Rubber Table is inspired by the humble sink plunger and made entirely of rubber. You could stick the whole table onto the wall… but then it wouldn’t really be a table. It might me of more use outside on an uneven surface as each of the rubbery legs are bendable.Thomas_Schnur_Table

The final set of super legs from Milan I’ve shown before but are worth looking at again and were from the School of the Art Institute of Chicago Rosanna Orlandi

I’m looking forward to seeing the final set of legs in the flesh at next months London Design Festival

Bambi Table by Norwegian designer Caroline Olsson is an adjustable two-height table with legs that fold back underneath, the joints inspired by the movement of the knee joint. The table will debut at 100% Design as part of the 100% Norway stand from September 22 to 25, 2011.Olsson_Bambi_Table
Follow my blog with Bloglovin

Black Line

Here are some products that have been stripped down to a single black line. There is no superfluous decoration, they’re structural sketches brought to life. Optically playing with our perceptions, 2D suddenly becomes 3D as you move around the pieces.

Hallerod&Svartholm-Mobile_singleChristian Hallerod and Johannes Svartholm Mobile Office & Art for  arts organisation Mossutställningar. A conceptual piece consisting of four unique modules representing archetypes from the office contained within a frame. The pieces can be used separately or in formation to create a complex labyrinth.Hallerod&Svartholm-Mobile_+


2D LED by ding3000 A simple outline of a lamp made in aluminium and rubber. The light can be bent over to provide directional lighting from the LED contained in the outline of a lampshade. It turns from a graphic icon of a lamp into an animated character with a tilt of its neck.

Ibaraki_BookshelfChicako Ibaraki – Weave Bookshelf.  Tokyo designer Ibaraki devised a bookshelf that can hold up to 200 books Interlocking steel frames have been set at angle to allow the books to be slotted in. The steel frame has been coated with a rubber paint to prevent the books from slipping.

Jorgensen_Loop_WardrobeLoop Stand by Leif Jørgensen for HayThe Loop collection is inspired by traditional trestles that have been stripped down to emphasise the 3D and give a graphic look. The range consists of trestles tables in three heights and and a wardrobe pictured here. I guess “wardrobe” is pushing it a bit but there you go!

Nendo_Thin_Black_LinesThin Black Lines byNendo Exhibited by Phillips de Pury & Company at the Saatchi Gallery during the London Design Festival and Frieze Art Fair.“Slight black lines like the traces of sketches drawn in the air made transparent surfaces and volumes appear, which we assigned practical functions.The designs gently break the relationship of before and behind, and traverse at times the space between two and three dimensions. Multi-faceted and constantly morphing, they move alternately between the becoming and collapse of form.”NendoHanger



Similar Posts:



The incandescent bulb is nearing the end of its life. Across the world governments having been passing legislation in favour of more energy conserving alternatives; and here in Europe a ban on selling 100watt bulb has been in place for a year.


We’ve mostly switched to the rather ugly compact tube fluorescent tube (CTF) and the ban on the frosted incandescent so infuriated lighting designer Ingo Maurer he had to come up with the Euro Condom pictured above (not sure if come up was quite the right phrase there!) The opaque condoms fit over clear incandescent bulbs – which are not affected by the guidelines – to give a similar effect to the banned bulbs. Its an amusing poke at European bureaucracy but when you look at the carbon emissions saved by getting rid of the old bulbs never mind the money saved on your electricity bills it makes sense to make the move.

So here are a few lights that have taken a little inspiration from the old bulb but been updated to comply with strict EU guidelines – its quite heartening to think bureaucracy can move design! America take note your Federal bureaucracy is years behind….


I don’t think you could have failed to notice Hulger’s Plumen lightbulb launched this year and billed as the worlds first designer energy saving light bulb. It uses 80% less energy than the traditional incandescent light bulb; and just like its ugly older brother (the compact tube fluorescent) it keeps down electricity bills and lasts around 8 times longer.  Hulger’s work came from the frustrations of the CTF; not only did it look ugly but the kind of light they give off is pretty poor.

“Make the bulb attractive and people will spend a bit more and enjoy a better quality of light and a design they appreciate every day. Glass tubes can be bent is many different shapes so why are there thousands of manufacturers but only three designs? We believe the answer is in the design.” The bulb is available in Europe with plans to launch in the USA early 2011.

Tremonto_lightMarcus Tremento is an artist who uses light as a  medium to express his work. His highly graphic and illustration based pieces draw inspiration from French Pop comics of the 1960’s his use of simple lines suggest three-dimensional form but in keeping with his source of inspiration he actually uses paper  – of a rather special kind. Tremento_lightThese lights employ Electroluminescent paper, which consists of an organic material that emit photons (light) when excited by an electric current, sandwiched between two thin layers of plastic. This method of producing light is distinct from standard incandescent lights in that there is no emission of heat. Electroluminescence was first developed in 1960 for use in automotive instrument panel backlighting.


Diamond Light by Eric Therner is a particularly beautiful alternative to the old light bulbs

“I’d like to see them as sculptures, with a function. Diamond Lights play with the concept of the light bulb. Stylewise, the common light bulbs look brilliant. I’m not sure though, if it is the shape, or it’s iconic value that makes it so beautiful.


The fact that it was “a” first, and what it meant to people when it first arrived, has surely played an important role during the years from product to icon. Diamond Lights is not a tribute or an attempt at making a better light bulb than the already existing one. I simply want to offer another choice.”

The result is an environmentally friendly, e-27 halogen lightbulb with a warm 15 watt glow and 2000- lifehours.


Pieke Bergmans Light Bulbs

Pictures at the top of this post the Light Bulbs are a series of crystal lamps, designed by Pieke  in a collaboration with Royal Crystal Leerdam. The lamps are all unique handcrafted crystal pieces, equipped with leds by Solid Lighting Design. They followed on from Pieke’s “Virus” series where she manipulates molten glass over various objects letting them gently ooze in a organic satisfying way.